Au Bon Pain (Space 49)
PASSFriday, January 20, 2017 at 5:50 PM
Violations Cited
03-3-501.14
Cooling
Eggs cooked and immediatley placed in the serving line sandwich unit. They registered from 91F to 115F . PIC stated that it had just cooked them placed them in a shallow tray and stored them at the two door refrigerating unit. Ensure that proper cooling is performed (2 hour -from 140F-70F another 4 hour from 70F-41F).
Why This Matters
This violation directly contributes to foodborne illness risk
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
03-3-501.16(A)
Cold Holding
Sandwich refrigerating unit- Chicken 47F Tuna 46F. Unit 40F. Chill food properly before placing for cold holding at the serving line..
Why This Matters
THE DANGER ZONE KILLS: Between 41°F-135°F bacteria double every 20 minutes. At 70°F, 10 bacteria become 10,000 in 2 hours, 10 million in 4 hours. Staphylococcus aureus produces heat-stable toxins that cooking cannot destroy. Clostridium perfringens causes 1 million illnesses yearly from temperature abuse. Listeria grows even under refrigeration, killing 20% of victims including pregnant women and newborns.
Code Requirements
ALL TCS foods MUST be held at 41°F or below at ALL times. This includes: All meat, poultry, seafood; Dairy products; Cut melons, tomatoes, leafy greens; Cooked rice, pasta, potatoes; Tofu, soy products; Sprouts; Garlic in oil. Check temperatures every 2 hours (4 hours maximum). If above 41°F for less than 2 hours, rapidly cool. If above 41°F for 2-4 hours, use immediately. If above 41°F for over 4 hours, DISCARD.
Corrective Actions
IMMEDIATE: Check ALL refrigerated foods NOW; Discard any food above 41°F for >4 hours; Rapidly cool foods 41-70°F if <4 hours; Repair/adjust all refrigeration immediately; Reduce inventory to prevent overstocking; Install thermometers in warmest part of all coolers; Implement 2-hour temperature checks; Create power outage procedure
M-2-103.11
PIC Performing Duties
Retrain staff with regard to proper cooling and cold holding.
Why This Matters
EXTREME RISK: Without active management, ALL five CDC risk factors go unchecked. Studies show restaurants without certified managers have 2.5 times more critical violations. Lack of supervision leads to: temperature abuse (bacteria double every 20 minutes), cross-contamination spreading pathogens, sick employees working with food, improper cooking allowing pathogen survival. This single violation enables conditions for major outbreaks.
Code Requirements
PIC MUST: Be present during ALL operating hours; Hold valid food safety certification; Actively monitor employee health and hygiene; Ensure proper cooking, cooling, and holding temperatures; Verify foods from approved sources; Monitor handwashing compliance; Ensure equipment properly sanitized; Take immediate corrective actions for violations; Demonstrate knowledge to health inspector; Train and supervise all food employees.
Corrective Actions
IMMEDIATE: Designate qualified PIC immediately; If no certified manager available, cease operations; Implement active managerial control system; Create monitoring logs for all CDC risk factors; Retrain management on responsibilities; Post PIC duties checklist
14-4-202.11
Food Contact Surfaces Design
Cutting board at the very first sandwich refrigerator at the serving line heavily scored. Re-surface or replace.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
21-3-304.14
Wiping Cloths Clean Sanitize
Wiping cloths stored soiled on the counters. Store properly in sanitizer solution.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper cleaning & sanitization procedures. Train all staff. Document corrective actions taken.
23-4-602.13
Non-Food Contact Surfaces Clean
Both hand washing sinks soiled. Clean properly. Counter below hand washing sink at the serving line soiled. Clean properly.
Why This Matters
INDIRECT CONTAMINATION: Dirty surfaces attract pests, harbor bacteria, and contaminate via contact or air movement. Dust from dirty shelves contains allergens affecting 32 million Americans. Grease accumulation creates slip hazards causing 25% of restaurant injuries.
Code Requirements
Non-food contact surfaces must be cleaned at frequency to prevent: Soil accumulation; Pest attraction; Contamination of food/food contact surfaces. Includes: Equipment exteriors; Shelving; Walls and ceilings; Light fixtures; Ventilation systems.
Corrective Actions
Deep clean all non-food contact surfaces; Create cleaning schedule with daily, weekly, monthly tasks; Assign cleaning zones to staff; Use degreaser for grease accumulation; Clean from top to bottom; Maintain cleaning log
29-5-201/02.11
Installed and Maintained
Hand washing sink at the serving line- hot water with very low water pressure. Repair.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
37-6-501.11-.12
Improper Maintenance of Walls/Ceilings
Floor under and around the equipments at the serving line soiled. Clean properly.
Why This Matters
OVERHEAD CONTAMINATION: Peeling paint and debris fall into food. Condensation on ceilings drips bacteria onto prep surfaces. Studies found ceiling tiles harbor Bacillus cereus spores. Restaurant ceiling collapse contaminated food service for 200 guests.
Code Requirements
Walls/ceilings must be: Smooth and washable in food areas; Light-colored for easy soil detection; Free of holes, cracks, peeling paint; Sealed at all joints and attachments; Clean and free of grease, dust, cobwebs; Non-absorbent in areas subject to moisture.
Corrective Actions
Repair all holes within 14 days; Repaint with washable paint; Replace damaged ceiling tiles; Seal all penetrations; Clean walls and ceilings monthly; Fix any leaks immediately; Install FRP panels in splash zones