BEACON HILL HOTEL & BISTRO
FAILWednesday, October 10, 2018 at 5:41 PM
Violations Cited
22-4-601/602.11
Food Contact Surfaces Clean
Interior panel of ice machine observed soled.Clean to remove soils. PIC correcting.
Why This Matters
BIOFILM FORMATION: Visible soil indicates biofilms - communities of bacteria protected by slime layers that resist sanitizers. Biofilms on slicers have caused Listeria outbreaks killing 30% of victims. Meat slicer contamination sickened 300 across 6 states. Grease harbors Listeria which grows at refrigeration temperatures.
Code Requirements
Food contact surfaces must be: Visibly clean with no food debris; Free of grease accumulation; Smooth and cleanable; Cleaned and sanitized after each use; Cleaned every 4 hours if in continuous use; Equipment must be disassembled for cleaning when necessary.
Corrective Actions
Clean and sanitize ALL equipment immediately; Disassemble equipment for thorough cleaning; Establish cleaning schedule with assigned responsibilities; Use cleaning checklist; Train on proper disassembly; Increase cleaning frequency
35-6-501.111/.115
Insects Rodents Animals
Fruit fly activity observed in food storage room.PIC to contact pest control.Provide full report upon re-inspection
Why This Matters
DISEASE VECTORS: Mice produce 50-75 droppings daily containing Salmonella, Hantavirus. Cockroaches carry 33 types of bacteria, 6 parasitic worms. Flies regurgitate and defecate on food, spreading E. coli, Shigella. One mouse can contaminate 10 times more food than it eats. Pest allergens trigger asthma in 26% of inner-city children.
Code Requirements
Facility must be pest-free: No live or dead pests; No droppings or urine; No gnaw marks or rub marks; No nesting materials; Effective pest control program; Monthly professional service recommended; All openings sealed; Remove harborage conditions.
Corrective Actions
Call pest control service immediately; Discard ALL contaminated food; Clean and sanitize all affected areas; Seal all openings larger than 1/4 inch; Install door sweeps; Eliminate standing water; Remove clutter; Increase cleaning frequency
15-4-202.16
Non-Food Contact Surfaces
Interior Gasket broken at 3 door reach in unit.Repair
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
17-4-302.14
Test Kit Provided
Provide Quats test kit.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
19-4-501.18-.110
Wash Rinse Water Clean Proper Temperature.
High temp machine rinse reading 141F.Repair.Maintain rinse temp 180-194F or per manufactures instructions. PIC has contacted repair service.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper temperature control procedures. Train all staff. Document corrective actions taken.
23-4-602.13
Non-Food Contact Surfaces Clean
Clean to remove excess water from interior of 3 door reach in.
Why This Matters
INDIRECT CONTAMINATION: Dirty surfaces attract pests, harbor bacteria, and contaminate via contact or air movement. Dust from dirty shelves contains allergens affecting 32 million Americans. Grease accumulation creates slip hazards causing 25% of restaurant injuries.
Code Requirements
Non-food contact surfaces must be cleaned at frequency to prevent: Soil accumulation; Pest attraction; Contamination of food/food contact surfaces. Includes: Equipment exteriors; Shelving; Walls and ceilings; Light fixtures; Ventilation systems.
Corrective Actions
Deep clean all non-food contact surfaces; Create cleaning schedule with daily, weekly, monthly tasks; Assign cleaning zones to staff; Use degreaser for grease accumulation; Clean from top to bottom; Maintain cleaning log