Noodle Barn
FAILThursday, November 9, 2017 at 7:09 PM
Violations Cited
03-3-501.14
Cooling
1) There was sauce cooling on the floor of the kitchen 48F the manager moved to a cooler but there was no temperature change after 15 minutes. (Discarded by manager). Provide proper cooling methods so items cooked earlier in the day can be rapidly cooled from 140F to 70F in two hours and then from 70F to 41F in an additional four hours.
Why This Matters
This violation directly contributes to foodborne illness risk
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
03-3-501.16(A)
Cold Holding
1) Walk-in cooler; fried chicken 45F sauce 45F. Provide proper cold holding of 41F or below. 2) Bean sprouts stored ion ice 50F. Provide proper cold holding of 41F or below. 3) The minced garlic is 57F. Provide proper cold holding of 41F or below. (Discarded by manager)
Why This Matters
THE DANGER ZONE KILLS: Between 41°F-135°F bacteria double every 20 minutes. At 70°F, 10 bacteria become 10,000 in 2 hours, 10 million in 4 hours. Staphylococcus aureus produces heat-stable toxins that cooking cannot destroy. Clostridium perfringens causes 1 million illnesses yearly from temperature abuse. Listeria grows even under refrigeration, killing 20% of victims including pregnant women and newborns.
Code Requirements
ALL TCS foods MUST be held at 41°F or below at ALL times. This includes: All meat, poultry, seafood; Dairy products; Cut melons, tomatoes, leafy greens; Cooked rice, pasta, potatoes; Tofu, soy products; Sprouts; Garlic in oil. Check temperatures every 2 hours (4 hours maximum). If above 41°F for less than 2 hours, rapidly cool. If above 41°F for 2-4 hours, use immediately. If above 41°F for over 4 hours, DISCARD.
Corrective Actions
IMMEDIATE: Check ALL refrigerated foods NOW; Discard any food above 41°F for >4 hours; Rapidly cool foods 41-70°F if <4 hours; Repair/adjust all refrigeration immediately; Reduce inventory to prevent overstocking; Install thermometers in warmest part of all coolers; Implement 2-hour temperature checks; Create power outage procedure
31-5-204/05.11
Location Accessible
The handsink in the back of the kitchen is blocked with equipment at the onset of hte inspection. Remove items and provide access to sink during all operational hours. (The items were cleaned out of the sink even before being asked to remove items)
Why This Matters
FORCED NON-COMPLIANCE: Blocked sinks force employees to skip handwashing. Studies show 89% compliance when sinks accessible vs 35% when blocked. Each skipped handwash potentially contaminates multiple food items. Inaccessible sinks contributed to Hepatitis A outbreak affecting 660 people.
Code Requirements
Handwashing sinks must be: Accessible at ALL times; Used ONLY for handwashing; Located within 25 feet of food prep; Clear of all equipment and supplies; Never used for food prep, dishwashing, or chemical disposal; Minimum one sink per 5 workers during peak times.
Corrective Actions
Clear ALL handwashing sinks immediately; Post 'Handwashing Only' signs; Relocate any blocking equipment; Provide alternative sinks for other uses; Train staff on sink designation; Monitor hourly for compliance
35-6-501.111/.115
Insects Rodents Animals
There are rodent droppings in the basement especially along the stairs and front of the basement. Fill any holes and continue to treat for pests.
Why This Matters
DISEASE VECTORS: Mice produce 50-75 droppings daily containing Salmonella, Hantavirus. Cockroaches carry 33 types of bacteria, 6 parasitic worms. Flies regurgitate and defecate on food, spreading E. coli, Shigella. One mouse can contaminate 10 times more food than it eats. Pest allergens trigger asthma in 26% of inner-city children.
Code Requirements
Facility must be pest-free: No live or dead pests; No droppings or urine; No gnaw marks or rub marks; No nesting materials; Effective pest control program; Monthly professional service recommended; All openings sealed; Remove harborage conditions.
Corrective Actions
Call pest control service immediately; Discard ALL contaminated food; Clean and sanitize all affected areas; Seal all openings larger than 1/4 inch; Install door sweeps; Eliminate standing water; Remove clutter; Increase cleaning frequency
04-3-501.15/4-301.11
Inadequate Facilities/Cooling Methods
There are cut vegetables out for lunch service stored on ice but the temperature is not maintained. Provide refrigeration for these items.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
08-3-302.15
Washing fruits and veg's.
Vegetables are being cut before they are washed. Wash fruits and vegetables prior to cutting.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
08-3-305-307.11
Food Protection
1) The bulk food items are stored in regular clean trash barrels. Provide foodservice grade storage containers or store food protected in plastic container. 2) There are food products stored on the ground and uncovered on the cooking line and in refrigerators. Store items elevated.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
23-4-602.13
Non-Food Contact Surfaces Clean
Interior of the refrigerators are soiled. Clean to remove.
Why This Matters
INDIRECT CONTAMINATION: Dirty surfaces attract pests, harbor bacteria, and contaminate via contact or air movement. Dust from dirty shelves contains allergens affecting 32 million Americans. Grease accumulation creates slip hazards causing 25% of restaurant injuries.
Code Requirements
Non-food contact surfaces must be cleaned at frequency to prevent: Soil accumulation; Pest attraction; Contamination of food/food contact surfaces. Includes: Equipment exteriors; Shelving; Walls and ceilings; Light fixtures; Ventilation systems.
Corrective Actions
Deep clean all non-food contact surfaces; Create cleaning schedule with daily, weekly, monthly tasks; Assign cleaning zones to staff; Use degreaser for grease accumulation; Clean from top to bottom; Maintain cleaning log
29-5-201/02.11
Installed and Maintained
The handwash sink on the cooking line is draining slow. Repair the drain so water drains quickly.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.
32-6-301.11-02.11
Hand Cleaner Drying Tissue Signage
There are no paper towels at the handsink in the basement and back of the kitchen. Provide towels.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section . Implement proper personal hygiene procedures. Train all staff. Document corrective actions taken.
37-6-501.11-.12
Improper Maintenance of Walls/Ceilings
The cooking equipment is soiled with food buildup. Clean to remove.
Why This Matters
OVERHEAD CONTAMINATION: Peeling paint and debris fall into food. Condensation on ceilings drips bacteria onto prep surfaces. Studies found ceiling tiles harbor Bacillus cereus spores. Restaurant ceiling collapse contaminated food service for 200 guests.
Code Requirements
Walls/ceilings must be: Smooth and washable in food areas; Light-colored for easy soil detection; Free of holes, cracks, peeling paint; Sealed at all joints and attachments; Clean and free of grease, dust, cobwebs; Non-absorbent in areas subject to moisture.
Corrective Actions
Repair all holes within 14 days; Repaint with washable paint; Replace damaged ceiling tiles; Seal all penetrations; Clean walls and ceilings monthly; Fix any leaks immediately; Install FRP panels in splash zones