🚨 Recent Restaurant Closures 🚨

Stop & Shop No. 413

FAIL

Monday, February 4, 2013 at 8:05 PM

Address
1025 TRUMAN PW
Hyde Park, MA 02136
Category
RF
Violations
5 total
⚠ 2 major
Facility History
64 inspections
23 failures

Violations Cited

⚠ MAJOR 22-4-601/602.11

Food Contact Surfaces Clean

Lobster tank white surfaces soiled clean.

Why This Matters

BIOFILM FORMATION: Visible soil indicates biofilms - communities of bacteria protected by slime layers that resist sanitizers. Biofilms on slicers have caused Listeria outbreaks killing 30% of victims. Meat slicer contamination sickened 300 across 6 states. Grease harbors Listeria which grows at refrigeration temperatures.

Code Requirements

Food contact surfaces must be: Visibly clean with no food debris; Free of grease accumulation; Smooth and cleanable; Cleaned and sanitized after each use; Cleaned every 4 hours if in continuous use; Equipment must be disassembled for cleaning when necessary.

Corrective Actions

Clean and sanitize ALL equipment immediately; Disassemble equipment for thorough cleaning; Establish cleaning schedule with assigned responsibilities; Use cleaning checklist; Train on proper disassembly; Increase cleaning frequency

Mass. Code: 105 CMR 590.004(G) | FDA Code: Section 4-601.11, 4-602.11
⚠ MAJOR 22-4-601/602.11

Food Contact Surfaces Clean

soiled knife stored in knife rack discontinue practice ensure knives are clean before storing in knife.

Why This Matters

BIOFILM FORMATION: Visible soil indicates biofilms - communities of bacteria protected by slime layers that resist sanitizers. Biofilms on slicers have caused Listeria outbreaks killing 30% of victims. Meat slicer contamination sickened 300 across 6 states. Grease harbors Listeria which grows at refrigeration temperatures.

Code Requirements

Food contact surfaces must be: Visibly clean with no food debris; Free of grease accumulation; Smooth and cleanable; Cleaned and sanitized after each use; Cleaned every 4 hours if in continuous use; Equipment must be disassembled for cleaning when necessary.

Corrective Actions

Clean and sanitize ALL equipment immediately; Disassemble equipment for thorough cleaning; Establish cleaning schedule with assigned responsibilities; Use cleaning checklist; Train on proper disassembly; Increase cleaning frequency

Mass. Code: 105 CMR 590.004(G) | FDA Code: Section 4-601.11, 4-602.11
• MINOR 14-4-202.11

Food Contact Surfaces Design

Ice unit lid broken repair.

Why This Matters

This violation affects overall sanitation and food safety

Code Requirements

Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.

FDA Code: Section 14.4.202
• MINOR 23-4-602.13

Non-Food Contact Surfaces Clean

Clean grease trap to remove foul odors.

Why This Matters

INDIRECT CONTAMINATION: Dirty surfaces attract pests, harbor bacteria, and contaminate via contact or air movement. Dust from dirty shelves contains allergens affecting 32 million Americans. Grease accumulation creates slip hazards causing 25% of restaurant injuries.

Code Requirements

Non-food contact surfaces must be cleaned at frequency to prevent: Soil accumulation; Pest attraction; Contamination of food/food contact surfaces. Includes: Equipment exteriors; Shelving; Walls and ceilings; Light fixtures; Ventilation systems.

Corrective Actions

Deep clean all non-food contact surfaces; Create cleaning schedule with daily, weekly, monthly tasks; Assign cleaning zones to staff; Use degreaser for grease accumulation; Clean from top to bottom; Maintain cleaning log

Mass. Code: 105 CMR 590.004(G) | FDA Code: Section 4-602.13
• MINOR 42-6-501.113/.114

Premises Maintained

Remove clutter from ware washing area empty basket and etc.

Why This Matters

This violation affects overall sanitation and food safety

Code Requirements

Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.

FDA Code: Section 42.6.501
View Facility Profile →
Data sourced directly from Boston Inspectional Services Department