Subway
FAILWednesday, August 5, 2020 at 1:44 PM
Violations Cited
590.003/3-403.11-P
Reheating for Hot Holding (P)
Review hot holding with PIC. She will need to reheat hot foods in microwave to 165F or above before putting them in hot holding unit.
Why This Matters
This violation directly contributes to foodborne illness risk
Code Requirements
Maintain all hot TCS foods at 135°F or above; Cannot use hot holding equipment to reheat
590.003/3-501.16-P1
(A)(1) Time/Temperature Control for Safety Food Hot and Cold Holding (P)
Meatballs in hot holding unit between 99F and 115F. Must be hot held at or above 135F.
Why This Matters
RAPID BACTERIAL GROWTH: At 50°F, E. coli doubles every 30 minutes. At 70°F, it doubles every 20 minutes. After 4 hours above 41°F, bacteria can reach dangerous levels causing severe illness. Common result: 24-72 hours of diarrhea, vomiting, fever, potential hospitalization.
Code Requirements
Immediately discard foods held above 41°F for over 4 hours. Rapidly cool foods above 41°F if less than 2 hours. Check ALL cooler temps every 2 hours with calibrated thermometer. Repair/adjust refrigeration immediately. Never store food in non-refrigerated areas.
590.004/4-302.12-PF
Food Temperature Measuring Devices (Pf)
PIC had a external thermometer. Please provide a metal stem thermometer to check food temperatures during reheating.
Why This Matters
TEMPERATURE ABUSE: Without thermometers, 73% of foods are held at unsafe temperatures. Bacteria double every 20 minutes between 41-135°F. Undercooked ground beef (not reaching 155°F) causes E. coli outbreaks affecting hundreds.
Code Requirements
Provide calibrated probe thermometers immediately: One per cook station minimum, Range -40°F to 200°F, Accurate to ±2°F, Calibrate daily in ice water (32°F). Check temps every 2 hours for holding, always for cooking.
590.006/6-201.11-C
Floors Walls and Ceilings-Cleanability (C)
Clean wall behind three bay sink. Visibly soiled.
Why This Matters
Poor facility maintenance can harbor pests and prevent proper cleaning
Code Requirements
Smooth, non-porous surfaces; Properly sloped to drains; No gaps or cracks; Maintained clean