🚨 Recent Restaurant Closures 🚨

Boston Park Plaza (Main Kitchen/Room Serv.)

FAIL

Friday, January 11, 2019 at 8:05 PM

Address
50 PARK PZ
Back Bay, MA 02116
Category
FS
Violations
8 total
⚠️ 1 critical
⚠ 1 major
Facility History
60 inspections
30 failures

Violations Cited

⚠️ CRITICAL 20-4-703.11

Food Contact Surfaces Clean

Chlorine 0 PPM at Low temp dish machine - Bar area (PIC placed machine out of order contacted dish washing company and instructed employees to do all ware washing at 3 bay sink in ware washing area) Final temperature at high temp machine 172 F - Ware washing PIC placed machine out of order contacted dish washing company and instructed employees to do all ware washing at 3 bay sink in ware washing area)

Why This Matters

INVISIBLE KILLERS: Bacteria survive on 'clean-looking' surfaces for days. Inadequate sanitization caused Salmonella outbreak affecting 1,500 people via ice cream. Cutting boards can harbor 200 times more fecal bacteria than toilet seats. E. coli survives 1-4 hours on surfaces. Norovirus survives 2 weeks. One contaminated slicer infected 300 people with Listeria.

Code Requirements

SANITIZATION MANDATORY: Chemical sanitizers: Chlorine 50-100 ppm, Quaternary Ammonium 200-400 ppm, Iodine 12.5-25 ppm; Hot water: 171°F for 30 seconds by immersion; Contact time: minimum 7-30 seconds depending on sanitizer; Test concentration EVERY 2 hours; Change solution when visibly soiled; ALL food contact surfaces must be sanitized: After each use with different foods; When switching raw to ready-to-eat; Every 4 hours in continuous use.

Corrective Actions

IMMEDIATE: Set up proper sanitizer at ALL stations; Test and adjust concentration NOW; Re-sanitize ALL food contact surfaces; Obtain test strips immediately; Post sanitizer concentration chart; Train staff on test strip use; Create sanitization log; Change solutions every 2 hours minimum

Mass. Code: 105 CMR 590.004(G) | FDA Code: Section 4-703.11
⚠ MAJOR 22-4-601/602.11

Food Contact Surfaces Clean

Soils on interior of ice machine

Why This Matters

BIOFILM FORMATION: Visible soil indicates biofilms - communities of bacteria protected by slime layers that resist sanitizers. Biofilms on slicers have caused Listeria outbreaks killing 30% of victims. Meat slicer contamination sickened 300 across 6 states. Grease harbors Listeria which grows at refrigeration temperatures.

Code Requirements

Food contact surfaces must be: Visibly clean with no food debris; Free of grease accumulation; Smooth and cleanable; Cleaned and sanitized after each use; Cleaned every 4 hours if in continuous use; Equipment must be disassembled for cleaning when necessary.

Corrective Actions

Clean and sanitize ALL equipment immediately; Disassemble equipment for thorough cleaning; Establish cleaning schedule with assigned responsibilities; Use cleaning checklist; Train on proper disassembly; Increase cleaning frequency

Mass. Code: 105 CMR 590.004(G) | FDA Code: Section 4-601.11, 4-602.11
• MINOR 10-3-304.12

Food Utensil Storage

Tongs stored on oven door handles and equipment - Cooking line (PIC took corrective action)

Why This Matters

This violation affects overall sanitation and food safety

Code Requirements

Immediate correction required. Follow health code section . Implement proper equipment procedures. Train all staff. Document corrective actions taken.

FDA Code: Section 10.3.304
• MINOR 14-4-202.11

Food Contact Surfaces Design

Worn cutting boards - Prep area

Why This Matters

This violation affects overall sanitation and food safety

Code Requirements

Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.

FDA Code: Section 14.4.202
• MINOR 15-4-202.16

Non-Food Contact Surfaces

No divider between hand sink and white bulk food containers - Kitchen/prep Chipped paint on wire shelving - Walk in unit

Why This Matters

This violation affects overall sanitation and food safety

Code Requirements

Immediate correction required. Follow health code section . Implement proper food safety procedures. Train all staff. Document corrective actions taken.

FDA Code: Section 15.4.202
• MINOR 19-4-501.18-.110

Wash Rinse Water Clean Proper Temperature.

Wash temperature 119 F/Final rinse 78 F at Low temp dish machine - Bar area (PIC placed machine out of order contacted dish washing company and instructed employees to do all ware washing at 3 bay sink in ware washing area)

Why This Matters

This violation affects overall sanitation and food safety

Code Requirements

Immediate correction required. Follow health code section . Implement proper temperature control procedures. Train all staff. Document corrective actions taken.

FDA Code: Section 19.4.501
• MINOR 21-3-304.14

Wiping Cloths Clean Sanitize

In use wiping cloths not stored in a sanitizing solution between uses

Why This Matters

This violation affects overall sanitation and food safety

Code Requirements

Immediate correction required. Follow health code section . Implement proper cleaning & sanitization procedures. Train all staff. Document corrective actions taken.

FDA Code: Section 21.3.304
• MINOR 37-6-501.11-.12

Improper Maintenance of Walls/Ceilings

Wall in disrepair - Men's employee bathroom

Why This Matters

OVERHEAD CONTAMINATION: Peeling paint and debris fall into food. Condensation on ceilings drips bacteria onto prep surfaces. Studies found ceiling tiles harbor Bacillus cereus spores. Restaurant ceiling collapse contaminated food service for 200 guests.

Code Requirements

Walls/ceilings must be: Smooth and washable in food areas; Light-colored for easy soil detection; Free of holes, cracks, peeling paint; Sealed at all joints and attachments; Clean and free of grease, dust, cobwebs; Non-absorbent in areas subject to moisture.

Corrective Actions

Repair all holes within 14 days; Repaint with washable paint; Replace damaged ceiling tiles; Seal all penetrations; Clean walls and ceilings monthly; Fix any leaks immediately; Install FRP panels in splash zones

Mass. Code: 105 CMR 590.006(B) | FDA Code: Section 6-501.11, 6-501.12
View Facility Profile →
Data sourced directly from Boston Inspectional Services Department