CARNEY HOSPITAL
PASSThursday, October 7, 2021 at 3:29 PM
Violations Cited
590.003/3-501.16-P
(A)(2) and (B) Time/Temperature Control for Safety Food Hot and Cold Holding (P)
Cheese in flip top refrigerator on cooking side of cafe at 51F. PIC removed all food and will have unit repaired.
Why This Matters
RAPID BACTERIAL GROWTH: At 50°F, E. coli doubles every 30 minutes. At 70°F, it doubles every 20 minutes. After 4 hours above 41°F, bacteria can reach dangerous levels causing severe illness. Common result: 24-72 hours of diarrhea, vomiting, fever, potential hospitalization.
Code Requirements
Immediately discard foods held above 41°F for over 4 hours. Rapidly cool foods above 41°F if less than 2 hours. Check ALL cooler temps every 2 hours with calibrated thermometer. Repair/adjust refrigeration immediately. Never store food in non-refrigerated areas.
590.004/4-301.11-PF
Cooling Heating and Holding Capacities-Equipment (Pf)
Small one door refrigerator on cooking side of cafe at 57F food at 51F. PIC removed food and put into walk in and will take unit out of service until repaired.
Why This Matters
Improper equipment maintenance can harbor bacteria and contaminate food
Code Requirements
Immediate correction required. Follow health code section 105 CMR 590.004. Implement proper equipment procedures. Train all staff. Document corrective actions taken.
590.004/4-903.11-C1
(A) (B) and (D) Equipment Utensils Linens and Single-Service and Single-Use Articles Storing (C)
A bread knife stored with clean knives but it was soiled. PIC removed and washed knives.
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section 105 CMR 590.004. Implement proper equipment procedures. Train all staff. Document corrective actions taken.
590.006/6-201.11-C
Floors Walls and Ceilings-Cleanability (C)
Clean floor under cooking equipment of dry food build up and any grime.
Why This Matters
Poor facility maintenance can harbor pests and prevent proper cleaning
Code Requirements
Smooth, non-porous surfaces; Properly sloped to drains; No gaps or cracks; Maintained clean