The Longwood Grille & Bar
FAILFriday, November 17, 2023 at 5:19 PM
Violations Cited
590.004/4-501.114-P
Manual and Mechanical Warewashing Equipment Chemical Sanitization-Temperature pH Concentration and Hardness (P)
Low temp bar machine not reading chlorine.Repair Maintain chlorine 50PPM or per manufactures instructions. PIC calling for repair Staff instructed by the PIC to use the kitchen machine
Why This Matters
INEFFECTIVE SANITIZATION: Below 50ppm chlorine or 200ppm quat, bacteria survive on 'clean' dishes. Above 200ppm chlorine leaves toxic residue causing chemical burns, nausea. 70% of restaurant outbreaks linked to improper sanitization.
Code Requirements
Maintain sanitizer at: Chlorine 50-100ppm, Quaternary Ammonium 200-400ppm, Iodine 12.5-25ppm. Test every 2 hours with test strips. Change solution when cloudy/dirty. Train all staff on mixing procedures.
590.004/4-601.11-PF
(A) Equipment Food-Contact Surfaces Nonfood-Contact Surfaces and Utensils (Pf)
Interior panel of the ice machine observed with soils.Clean to remove soils.
Why This Matters
Improper equipment maintenance can harbor bacteria and contaminate food
Code Requirements
Immediate correction required. Follow health code section 105 CMR 590.004. Implement proper equipment procedures. Train all staff. Document corrective actions taken.
590.006/6-501.111-PF
Controlling Pests (Pf)
Live mouse on a glue trap observed behind the ice cream chest freezer.Remove Provide a full pest report upon re-inspection PIC removed the glue trap
Why This Matters
SEVERE CONTAMINATION: Rodent droppings carry 35+ diseases including Hantavirus (36% mortality rate), Salmonella (20% of cases from rodents), Leptospirosis (kidney/liver failure). Mice contaminate 10 times more food than they eat through urine and droppings.
Code Requirements
IMMEDIATE ACTION: Clean/sanitize all affected areas with 10% bleach solution. Discard ALL exposed food. Seal holes over 1/4 inch (mice) or 1/2 inch (rats). Remove food sources. Install bait stations. Professional extermination within 24 hours.
590.004/4-501.11-C
Good Repair and Proper Adjustment-Equipment (C)
High temp dish machine observed leaking.Repair
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section 105 CMR 590.004. Implement proper equipment procedures. Train all staff. Document corrective actions taken.
590.004/4-502.11-C
(A) and (C) Good Repair and Calibration-Utensils and Temperature and Pressure Measuring Devices (C)
High temp dish machine rinse guage reading 110F.Repair/replace guage Maintain rinse reading 180-194F or per manufactures instruction. Temp disk reading 160F
Why This Matters
This violation affects overall sanitation and food safety
Code Requirements
Immediate correction required. Follow health code section 105 CMR 590.004. Implement proper temperature control procedures. Train all staff. Document corrective actions taken.
590.006/6-501.13-C
Cleaning Floors Dustless Methods (C)
Clean the service station floor to remove soils/spills & food debris.
Why This Matters
Poor facility maintenance can harbor pests and prevent proper cleaning
Code Requirements
Smooth, non-porous surfaces; Properly sloped to drains; No gaps or cracks; Maintained clean