🚨 Recent Restaurant Closures 🚨

YAN'S CHINA STAR

PASS

Thursday, May 26, 2016 at 2:26 PM

Address
1102 WASHINGTON ST
South End, MA 02118
Category
FT
Violations
4 total
⚠️ 2 critical
⚠ 1 major
Facility History
23 inspections
10 failures

Violations Cited

⚠️ CRITICAL 03-3-501.16
✓ Corrected

Hot Holding

Rice on counter @ 100f ensure proper hot hold of 140 or above

Why This Matters

This violation directly contributes to foodborne illness risk

Code Requirements

Maintain all hot TCS foods at 135°F or above; Cannot use hot holding equipment to reheat

FDA Code: Section 03.3.501
⚠️ CRITICAL 03-3-501.16(A)
✓ Corrected

Cold Holding

cooked pork on counter @ 52f ensure prope cold hold of 41f or below

Why This Matters

THE DANGER ZONE KILLS: Between 41°F-135°F bacteria double every 20 minutes. At 70°F, 10 bacteria become 10,000 in 2 hours, 10 million in 4 hours. Staphylococcus aureus produces heat-stable toxins that cooking cannot destroy. Clostridium perfringens causes 1 million illnesses yearly from temperature abuse. Listeria grows even under refrigeration, killing 20% of victims including pregnant women and newborns.

Code Requirements

ALL TCS foods MUST be held at 41°F or below at ALL times. This includes: All meat, poultry, seafood; Dairy products; Cut melons, tomatoes, leafy greens; Cooked rice, pasta, potatoes; Tofu, soy products; Sprouts; Garlic in oil. Check temperatures every 2 hours (4 hours maximum). If above 41°F for less than 2 hours, rapidly cool. If above 41°F for 2-4 hours, use immediately. If above 41°F for over 4 hours, DISCARD.

Corrective Actions

IMMEDIATE: Check ALL refrigerated foods NOW; Discard any food above 41°F for >4 hours; Rapidly cool foods 41-70°F if <4 hours; Repair/adjust all refrigeration immediately; Reduce inventory to prevent overstocking; Install thermometers in warmest part of all coolers; Implement 2-hour temperature checks; Create power outage procedure

Mass. Code: 105 CMR 590.003(D) | FDA Code: Section 3-501.16(A)(2)
⚠ MAJOR 22-4-601/602.11
✓ Corrected

Food Contact Surfaces Clean

clevers stored between wall and equipment store clean and dry

Why This Matters

BIOFILM FORMATION: Visible soil indicates biofilms - communities of bacteria protected by slime layers that resist sanitizers. Biofilms on slicers have caused Listeria outbreaks killing 30% of victims. Meat slicer contamination sickened 300 across 6 states. Grease harbors Listeria which grows at refrigeration temperatures.

Code Requirements

Food contact surfaces must be: Visibly clean with no food debris; Free of grease accumulation; Smooth and cleanable; Cleaned and sanitized after each use; Cleaned every 4 hours if in continuous use; Equipment must be disassembled for cleaning when necessary.

Corrective Actions

Clean and sanitize ALL equipment immediately; Disassemble equipment for thorough cleaning; Establish cleaning schedule with assigned responsibilities; Use cleaning checklist; Train on proper disassembly; Increase cleaning frequency

Mass. Code: 105 CMR 590.004(G) | FDA Code: Section 4-601.11, 4-602.11
• MINOR 23-4-602.13
✓ Corrected

Non-Food Contact Surfaces Clean

bulk food containers with old soils clean to remove 2) shelves with old soils clean to remove

Why This Matters

INDIRECT CONTAMINATION: Dirty surfaces attract pests, harbor bacteria, and contaminate via contact or air movement. Dust from dirty shelves contains allergens affecting 32 million Americans. Grease accumulation creates slip hazards causing 25% of restaurant injuries.

Code Requirements

Non-food contact surfaces must be cleaned at frequency to prevent: Soil accumulation; Pest attraction; Contamination of food/food contact surfaces. Includes: Equipment exteriors; Shelving; Walls and ceilings; Light fixtures; Ventilation systems.

Corrective Actions

Deep clean all non-food contact surfaces; Create cleaning schedule with daily, weekly, monthly tasks; Assign cleaning zones to staff; Use degreaser for grease accumulation; Clean from top to bottom; Maintain cleaning log

Mass. Code: 105 CMR 590.004(G) | FDA Code: Section 4-602.13
View Facility Profile →
Data sourced directly from Boston Inspectional Services Department